4.5" Davis Standard Extruder for Sale! -Nice machine! Won't last long!

Used 4.5" Davis Standard Super Blue Extruder, Model SB450 24:1 L/D Ratio17.39:1 Gearbox Ratio, Gearbox Rated to 400 HPAir Cooled Barrel, 5 Barrel Zones, 6 Die ZonesControl Panel With Eurotherm 3208 Temperature Controllers, Tachometer, Amp Gauge, Gefran 40TB Pressure Readout, Solid State Relays,...

Continue reading

AUCTION TOMORROW-October 17th @ 10am EDT

Plant Closed - Plastic Injection Molders, Extruders & Packaging Equipment

Continue reading

MUST MOVE! Extruders for Plastic Pipe!

ITEM 16256B - Used 118mm Theysohn Parallel Screw Extruder, Model TTM 118-118mm Tugsten Screws, 28:1 L/D Ratio, 117 kW AC Motor, 29.8 Rpm Screw, 64 kW Heating Capacity, 5 heating Zones, 3 Cooling Zones, 45" Centerline, New In 2000 ITEM 16244B -Cincinnati Milacron 80mm Conical Screw Extruder...

Continue reading


Used 2.5" Davis Standard Mark 6 Extruder, Model 25MK6, 24:1 L/D, Air Cooled, 4 Barrel Zones, 1 Clamp and 1 Die Zone, Controlled By Eurotherm 2208E temperature Controllers, Individual Amp Gauges for Each Zone and Pressure, Load, RPM, Readouts, 4 - 7000 Watt Heater Bands, 40 HP A/C Motor, Control Tech...

Continue reading

Just shipped in last week! 3.5" Davis Standard Single Screw Extruder

3.5" Davis Standard Single Screw Extruder, Model 35IN35V, Water Cooled, 100HP Used 3.5" Davis Standard Single Screw Extruder, Model 35IN35V,Water Cooled, 5 Barrel Zones, 3 Die Zones, Eurotherm Temperature Controls, Pressure Readout, Amp Meter, RPM Gauge100 Hp AC Motor, Allen Bradley Drive, Direct Dr...

Continue reading

REBUILT 80mm Milacron Conical Twin Screw Extruder, NOW AVAILABLE!

Rebuilt 80mm Milacron Conical Twin Screw Extruder, Model CM111, 2017  4 Barrel Heat Zones, 3 Barrel Cooling Zones 75HP Baldor Inverter Duty AC Motor, 2505 RPM, 75HP Yaskawa AC Drive Mosaic Controller Tungsten Barrel and Screws 185 Hours!!!!   Call our office at&nbs...

Continue reading

Need a machine to go to a facility overseas? No problem!

Last Friday we loaded a crated Extruder into a container going to China!          Arlington accommodates our customers needs and will assist you in getting a machine anywhere in the world!   From the purchase, customs paperwork, crating, to loading safely into a co...

Continue reading

2 Extrusions Lines For Sale! TAKE A LOOK!

3.5" Single Screw Flexible PVC Compounding Line Used 3.5" Sterling Single Screw Compounding Line: Includes the Following-3.5" Sterling Single Screw Extruder, 30:1 L/D, Vented, Water Cooled, 100HP Baldor Motor with Drive, Includes Hopper,Screw & DieExtruder Serial Number: 35732-Water Trough with...

Continue reading

NOW AVAILABLE! Used 1.25" Davis Standard Pedestal Extruder, Model DS125

Used 1.25" Davis Standard Pedestal Extruder, Model DS125, 5 HP AC Black Max Motor, Fuji AF-300G11 AC Drive, 16.5:1 Gear Box Ratio, Air Cooled, 3 Barrel Zones, Eurotherm 2208 Temperature Controls, Has 3 Barrel Zones But No Control, Solid State Relays, Amp Load Gauge, RPM Gauge, Dynisco Pressure Reado...

Continue reading

AVAILABLE NOW! 6" Davis Standard Single Screw Pelletizing Line with Gala Underwater Pelletizer

Used 6" Davis Standard Single Screw Pelletizing Line with Gala Underwater Pelletizer, New in 1999 Line Consist Of The Following Pieces: 6" Davis Standard Single Screw Extruder, Model 60IN60TPIH, Water Cooled, 34:1 L/D, Vented Barrel (Located 126" From Feed Throat),  500HP GE Motors DC Motor, 17...

Continue reading

Arlington Machinery Reviews

Garrett was very knowledgeable, and upfront which simplified the process.

Return to top