Have machinery to sell? We are always looking to purchase used machinery. Contact us today!

NAFTA Article in Industry Magazine

The recent article on NAFTA that quoted David Pietig from Arlington Plastics Machinery has been picked up by the industry magazine Surplus Record for their June issue.  While it won't be on their online edition, you can still see it on the AP website.  The article is quite good and worth a read.

Continue reading

35 ton Engel 80/35 Injection Molder

35 Ton Engel Injection Molding Machine, Model 80/35, 1994, Tiebarless Clamp Force..............35 Ton Platen Size..................21.65" x 15.35" Daylight.......................18.90" Clamp Stroke...............13" Machine S/N 26424-94 230/60/3 44 Amp REF 8203

Continue reading

Plastic Filtration Information

Screen Changers and other filtration methods are extremely important in keeping contaminants out of the final plastic product.  An article in Plastics Engineering magazine spells out the differences and uses for the different types. If you'd like to see Arlington's current inventory, click below...

Continue reading

100mm Davis Standard, New Asking Price

We've just reduced the price of the following machine: 100MM Davis Standard Extruder, 26.1 L/D, Air Cooled Barrel Item #:  6219 Model:  35IN35 Year:  2006 Manufacturer:  Davis Standard Size:  3.93 Description: Used Davis Standard Extruder, Mark Series, Model 35MV350, 100MM Diameter, 26:1 L...

Continue reading

Recovering and Recycling Food Packaging

Those that recycle food packaging have found ways to make a profit even though there challenges to this process.  This helps keep plastic out of the landfills as curbside collections increase for residences.  There is an interesting article in American Recycler that can be found.

Continue reading

1.25" Davis Standard Extruder, 24:1 L/D Ratio, Air Cooled, 7.5 HP

Item #:  8188 Model:  DS-125 Year:  1995 Manufacturer:  Davis Standard Size:  1.25 Description: 1.25" Davis Standard Extruder, 24:1 L/D Ratio, Model DS-125, Air Cooled, 7.5 HP, 3 Barrel Zones, 7.5 HP Reliance Motor, Belt Driven, 15:1 Gear Box Ratio, on Pedestal with Tilt, 1995. S/N R0327

Continue reading

Kreyenborg Continuous Screen Changers

We have two Kreyenborg Continuous Screen Changers available right now.  The 176mm is a new listing and late model.  It should go quickly. 176mm Kreyenborg Continuous Screen Changer, Model K-SWE-180/PET, 2010 Vintage 148 mm Kreyenborg Dual Bolt Screen Changer, Model K-SWE 160  

Continue reading

European Plastics & Rubber Machinery

In this month's issue of Pipe & Profile Magazine, there is an article discussing European plastics and rubber machinery and their recovery from the recession.  It signals good things for the plastics machinery market. Article begins on page 11. Click title of magazine above to view the publicati...

Continue reading

55mm Cincinnati Milacron Twin Screw Extruder

Used 55mm Cincinnati Milacron Twin Screw Extruder, Model E55 Pinnacle, Counter Rotating, Conical Screw Design, 40 HP Reliance AC Motor with Control Techniques AC Drive, Screw Cooling, 4 Barrel Zones, 6 Die Zones, Previously Running PVC, Comes with Clamp, Approximately 29,100 Hours. S/N E55A0200046 4...

Continue reading

330 Ton Cincinnati Roboshot S-2000 I 330B Injection Molding Machine, 2006 Vintage

Item #: 8190 Model:  S-2000 300B Year:  2006 Manufacturer:  Cincinnati Milacron Size:  330 Description: Used 330 Ton Milacron Fanuc Roboshot Model S2000I 330B, 2006 Vintage Clamp Force............................330 Ton Shot Size..................................35.20 Oz Mold Stroke............

Continue reading

Arlington Machinery Reviews

We were looking to replace a piece of equipment and Arlington had exactly what we were looking for. So far both pieces we have bought from them have worked out to be good investments.

Return to top