Have machinery to sell? We are always looking to purchase used machinery. Contact us today!

LOOK at this!! 6" Davis Standard Extruder, New in 2012 - LOW HOURS!

6" Davis Standard Extruder, 30:1 L/D, Air Cooled, 600 HP New In 2012 LOW HOURS! 180" EDI Magnum Sheet Die .5" Lip Opening

Continue reading

SOLD! 3.5" American Kuhne Single Screw Extruder, NEW IN 2016!

VIDEO AVAILABLE - Click here! Used 3.5" American Kuhne Single Screw Extruder, 24:1 L/D, 75 Hp Vector Duty Motor, With (IP56 Protection) Direct Drive Gearbox, 100 RPM (UNEX 5.2), Gearbox Rated For 168 HP With 1.5 S.F, Watercooled Feed Throat, Powerseal Bushing, Dynisco Pressure Transducer,...

Continue reading

125mm Kuhne Lowboy Extruder Available!!

125mm Kuhne Lowboy Extruder, 33:1 L/D Ratio, 253 KW Motor (340 hp) Air-cooled, 7 Barrel Fans34" Centerline200" Total Length x 68" Width Click for more information! Call our office @ 847-956-7300!

Continue reading

Arlington Machinery Makes Buying Machinery Easy!

During these times when an in-person inspection is difficult or not an option, if we have the machine in stock the below are some of the services we can provide. Barrel and Screw Clean and measure barrels up to 8”. Measure screw flights and generate a report of condition and screw style Main Extrude...

Continue reading

MUST MOVE! Extruders for Plastic Pipe!

ITEM 16256B - Used 118mm Theysohn Parallel Screw Extruder, Model TTM 118-118mm Tugsten Screws, 28:1 L/D Ratio, 117 kW AC Motor, 29.8 Rpm Screw, 64 kW Heating Capacity, 5 heating Zones, 3 Cooling Zones, 45" Centerline, New In 2000 ITEM 16244B -Cincinnati Milacron 80mm Conical Screw Extruder...

Continue reading


Used 2.5" Davis Standard Mark 6 Extruder, Model 25MK6, 24:1 L/D, Air Cooled, 4 Barrel Zones, 1 Clamp and 1 Die Zone, Controlled By Eurotherm 2208E temperature Controllers, Individual Amp Gauges for Each Zone and Pressure, Load, RPM, Readouts, 4 - 7000 Watt Heater Bands, 40 HP A/C Motor, Control Tech...

Continue reading


What can Arlington do for you? When it comes to extruders, Arlington Machinery offers services that go above and beyond the traditional used machinery dealer.  The below services are al cart and can be quoted accordingly for each specific machine in stock.  These services are designed to h...

Continue reading

Just shipped in last week! 3.5" Davis Standard Single Screw Extruder

3.5" Davis Standard Single Screw Extruder, Model 35IN35V, Water Cooled, 100HP Used 3.5" Davis Standard Single Screw Extruder, Model 35IN35V,Water Cooled, 5 Barrel Zones, 3 Die Zones, Eurotherm Temperature Controls, Pressure Readout, Amp Meter, RPM Gauge100 Hp AC Motor, Allen Bradley Drive, Direct Dr...

Continue reading

REBUILT 80mm Milacron Conical Twin Screw Extruder, NOW AVAILABLE!

Rebuilt 80mm Milacron Conical Twin Screw Extruder, Model CM111, 2017  4 Barrel Heat Zones, 3 Barrel Cooling Zones 75HP Baldor Inverter Duty AC Motor, 2505 RPM, 75HP Yaskawa AC Drive Mosaic Controller Tungsten Barrel and Screws 185 Hours!!!!   Call our office at&nbs...

Continue reading

NEW TO INVENTORY!! 4.5" Polytruder Extruder, 36:1 L/D, Water Cooled, 250 Hp AC, Highboy

Used 4.5" Polytruder Extruder, Model 4.5-32-250  36:1 L/D Ratio, Water Cooled, 250 HP Marathon Blue Max AC Motor With ABB ACS800 Drive, Belt Driven To A Flender Gearbox, Gearbox Ratio 17.74, Gearbox Capacity 250 Hp, Non Vented Barrel, 8 Barrel Zones, 8 Die Zones, RKC Temp Controllers, Model CB4...

Continue reading

Arlington Machinery Reviews

We were looking to replace a piece of equipment and Arlington had exactly what we were looking for. So far both pieces we have bought from them have worked out to be good investments.

Return to top