Quote
Call (877) 887-9408 International: (312) 878-3809

JTW International Plastic Scrap Compactor, Model KP6042

Item #: 8821 Model: KP6042 Manufacturer: JTW International, Inc. Description: JTW International Plastic Scrap Compactor, Model KP6042, 5 HP Ram, 5 Hp Blower, One Heating Zone, Brick Dimensions 6" x 5", Length Control 8"-44" Range. Pneumatic Guillotine Cutter. Used For Loose  Flexible Poly Scrap No...

Continue reading

96" Wide Johnson Sheet Line, Installed and Running!

96" Wide Johnson Sheet Line Consisting Of The Following Pieces: 3 HP Conair Vacuum Pump with Dust Collector, Conair Vacuum Received, Misc. Vacuum Pipe. 4.5" Johnson Extruder , 36:1 L/D Ratio, 17.70:1 Lufkin Gearbox Rated To 332 HP, Double Vented  And Plugged Barrel, Water Cooled, 42" Centerline H...

Continue reading

500MM Orenda Pulverizing System, Model H1D500

Used Orenda Model H1D500, Single Mill Pulverizing System, 750MM(29.53") Mill Housing, 500MM(19.69") Disk Diameter, Lesson 150 HP Main Motor, 20 Mesh Screen,  GE Quick Panel Touch Screen Controls, Soft Start for Main Motor, 2,000 CFM Cooling Cyclone, 8" Rotary Air Lock, Tru-Balance Multi-Deck Sifter,...

Continue reading

What is Thin Wall Injection Molded Packaging?

Thin wall injection molding is a subset of typical injection molding for mass-producing plastic parts that are thin and light.  The design of the machines allow the parts to use as little material as possible and to have high cycle times - creating savings in resin and creating high output of the pr...

Continue reading

6" Merritt Single Screw Extruder, Series MX, 24:1 L/D Ratio, 400 Hp AC Motor

Item #: 8833 Model: MX Year: 2003 Manufacturer: Merritt Size: 6 Description: 6" Merritt Single Screw Extruder, Series MX, 24:1 L/D Ratio, 400 Hp Reliance AC Motor, (472amp) Water Cooled Barrel, 5 Barrel Zones, Amp Meters For Each Zone, Water Cooled Screw, Flender Gearbox, 18:1 Gear Box Ratio,...

Continue reading

Machines we need for our customers right now.

We have an immediate need for the following used plastics equipment. 1.5" pedestal NRM or Davis Standard Extruder. Weima Shredder Single Station Thermoformer 24" x 24" or 30" x 30", 20" depth Late Model 700 ton Injection Machine, 100 oz or larger High Speed Tubing Line Large Witte or Sweco, a...

Continue reading

800 ton Netstal Synergy, only 880 Hours!

800 Ton Netstal Synergy Model S8000-5500E Injection Molding Machine, 2007 Vintage, 77 Oz, Only 880 Hours!!!! Item #: 8853 Model: S8000-5500E Year: 2007 Manufacturer: Netstal Size: 800 Description: 800 Ton Netstal Model S8000-5500E Injection Molding Machine, New 2007, 77 Oz, Only 880 Hours!!!! S...

Continue reading

Mechanic/Electrician Wanted

Seller of used plastics machinery has an opening for a skilled Industrial Mechanic/Electrician who will repair all types of industrial equipment.  Machines may need to be simply test ran or completely rebuilt.  The qualified candidate will perform inspections, make recommendations for course of acti...

Continue reading

Important Components of an Extruder

There are many things to consider when buying an extruder for your application.  Following are the major components: Feed Throat - The feed throat or feed opening is the area that accepts the plastic pellets to be heated.  The size of the opening and the location of the feed throat on the barrel c...

Continue reading

Reduction Engineering Ultra Dual Pulverizing System, 2014 Vintage

Item #: 75238 Model: Ultra Year: 2014 Manufacturer: Reduction Engineering Description: Reduction Engineering Ultra Dual Pulverizing System, 2014 Vintage Two 75hp Motors, 4 Discs With Siemens Touch Screen Control, 35 Mesh. Estimated Outputs 2,000-3,000 lbs 25 HP Blower 203.3 Amps 460 Volt S/N...

Continue reading

Subscribe