Blog - Arlington Machinery

Unused Granulator for Sale - Dont Miss This Opportunity!

Fri, 13 Mar 2026 16:20:41 GMT

We have this unused 16" x 40" AEC GP1640 granulator for sale. It was never put into production. You can save $20,000 over a new one.

60” Wide Davis Standard Co-Ex Sheet Line

Fri, 13 Mar 2026 13:48:42 GMT

We have a customer selling this Davis Standard co-ex sheet line.

60” Wide Davis Standard Co-Ex Sheet Line

Lines Consists Of The Following Pieces:

4.5” Davis Standard Single Screw Extruder, 30:1 L/D, Model Thermatic III, Vented Barrel With 7.5 HP Nash Vacuum Pump, Air-Cooled Barrel, 6 Barrel Zones, 10 Die Zones, 45IN45HT Gearbox Rated To 360 HP, 17.49:1 Gearbox Ratio, 300 HP AC Motor, Control Panel With 16 Eurotherm 2208 Temperature Controllers, New In 2001

4.5” Dynisco EH-45 Hydraulic Slide Plate Screen Changer With Hydraulic Power Unit

Dynisco 275 Melt Pump With Static Mixer, AC Motor

3.0” Davis Standard Co-Extruder – Additional Information Coming Soon

58" Wide Sheet Die

60” Wide Davis Standard Ex-M-Plar III Roll Stack, Upstacking, 18” Diameter Rolls, Individually Driven Rolls, 3 HP Motors, 25’ Long Cooling Conveyor, Hydraulic Roll Pressure

60” Wide X 8” Diameter Rubber Pull Rolls, 3 HP AC Motor

72” Wide Famco Shear

TH60 Trim Saw, Two 10 HP Motors With AC Inverter Drives, Manual Adjustment, 36” To 60” Finished Width

SH60 Traveling Sheet Saw – Cross Cut, 20” Table Travel, 10 HP Motor With AC Inverter Drives, Pneumatic Clamp Pressure

500 Ton Milacron-Fanuc Roboshot a-S450iA , Zero Production Hours, New In 2020

Wed, 11 Mar 2026 21:16:01 GMT

We have this unused molding machine for sale. This 500 ton Milacron-Fanuc Robotshot was purchased in 2000 but never put into production. It is a Milacron-Fanuc a-S450iA with 944 gram shot size. You'll save well over $100,000 compared to buying new today.

78" Cumberland/Zerma Single Shaft Shredder, Model ZXS2000, 240 HP, New In 2011

Tue, 10 Mar 2026 21:19:01 GMT

We have this 2011 Zerma / Cumberland shredder for sale. It is a monster of a machine. This dual motor unit has 240 angry horses ready to destroy your material. With the hardfaced rotor you can through

This Cumberland/Zerma ZXS2000 That Arlington Has For Sale Is A High Output Shredder. The Hardfacing On The Rotor Makes It Ideal For Highly Abrasive Applicaitons. Zerma Recommends This Machine For

Recycling And Size Reduction Of Large, Tough, And Bulky Materials. It Will Process Plastics, Wood, Paper, E-waste, Rubber, And Post-consumer Waste.

Late Model Vecoplan VAZ 1600 Shredder For Sale, Only 1,651 Hours On Machine!!

Mon, 02 Mar 2026 16:11:54 GMT

Arlington Plastics Machinery is getting its hands on a late-model Vecoplan VAZ 1600 shredder that ticks all the boxes when it comes to high-throughput size reduction. Capable of 3,500 LBS/HR according to the manufacturer, this was New in 2022 and installed in 2024, and is only showing 1,651 hours of use.

This is a 62-inch class machine with a 62” x 80” hopper opening, a sizeable 6.4 cubic yard capacity hopper. The rotor is 20" across and 63" long, and spins at 145 RPM. Power-wise, it's a 460-volt setup, with 170.78 Total Amps, complete with PLC controls.

This Late Model VAZ 1600 features a jointed shaft drive with a turbo clutch and the works - conical spur gears, PTC motor overloads, and overload control limit switches with integrated display alarms on the control cabinet. It also has externally adjustable counter knives. Hydraulic swing-up screen carriages with rotatable screens (it's currently set up with a 2-inch screen) - plus it comes with a Vecoplan infeed conveyor.

If you're in the market for equipment to help sort out a plastics recycling line, maybe some purgings and lump reduction, post-industrial scrap processing, or general regrind prep - this shredder is perfect for you.

Arlington Plastics Machinery isn't just a seller of used plastics equipment, either - we also buy and appraise equipment also. Contact your Arlington sales guy today if you have any questions!

Used 25mm Krupp Werner ZSK 25 Twin Screw Extruder Available Now

Tue, 03 Feb 2026 20:50:25 GMT

If you are searching for a compact twin screw extruder for compounding, formulation work, and process development, this 25mm Krupp Werner ZSK 25 is available now. It is a practical size for pilot runs and small batch production, and it is a great fit when you want the mixing performance of a twin screw without dedicating floor space to a larger extrusion machine.

Highlights and specs

- Used 25mm Krupp Werner ZSK 25 twin screw extruder
- L/D ratio: 36:1
- Nine barrel segments, with barrel vents in zone 6 and zone 8
- Five temperature control zones
- Infeed height: 48 inches
- Feed throat: 2” x 2” square
- Max screw speed: 1120 RPM

Drive, controls, and electrical

This plastic extruder is set up with a modern, serviceable control and drive package that makes it attractive for development lines and pilot-scale production:

Siemens VFD duty spindle style motor, motor type 1PH8133 1HG03 2BA1
480/3/60, 41.0 A, 25.0 kW, 2800 RPM

Allen Bradley PowerFlex 755 AC VFD, Cat No 20G11ND052
Input: 480/3/60, 47.7 A, output 0-460, 3/60, 52 A normal duty, 40 A heavy duty

P I V Antrieb speed reducer, type 21.1P82M, rated output speed 1200 RPM, rated output torque at shaft 65 lbs ft, ratio 2.5 to 1

Five Eurotherm 2216e temperature controllers inside the cabinet
Total Control Quickpanel HMI
Analog pressure gauge
100 amp main disconnect

Use the listing link and request a quote on item 22586A or contact your Arlington sales guy.

https://www.arlingtonmachinery.com/product-detail/21774/25mm-krupp-werner-zsk-25-twin-screw-extruder-ld/

Inside the Rebuild, A 400 HP 6" Davis Standard Thermatic Extruder

Mon, 02 Feb 2026 20:52:40 GMT

Some machines show up in decent shape and go right back to work. Others deserve a full reset and some TLC so the next owner can run with confidence. This blog post encapsulates this machine's journey through its rebuild.

This 6" Davis Standard single screw extruder, Model 60IN60, is getting the full reset treatment it deserves! A water-cooled 24:1 L/D unit, originally new in 2004, is going through a thorough reconditioning process before it is released for sale. All new valve solenoids have been installed to keep up with barrel cooling demands.

A New 400 HP Motor & Drive Package from Teco Westinghouse has been chosen to power this machine!! Covered by a 3-Year Manufacture Warrantee.

All new electronic components, such as Novus temp controllers and amp gauges for the monitoring & operation.

Call your Arlington sales guy and learn more about this machine's story and how it can help you meet your manufacturing process needs today!

https://www.arlingtonmachinery.com/product-detail/19659/6-davis-standard-single-screw-extruder-model/

Arlington Machinery Has This 2020 Vecoplan V-Eco 1300 For Sale

Tue, 27 Jan 2026 20:09:38 GMT

Save $150,000 versus buying new with almost no lead time. Arlington has this beautiful Vecoplan shredder for sale. This Vecoplan V-Eco 1300 has the W rotor for films, fiber, and rigid materials. It includes a Vecoplan conveyor. Contact your Arlington sales person for more information.

Moving a 3.5" Davis Standard Extruder Into a Customer Facility Using Remote Control Skates

Thu, 22 Jan 2026 13:53:27 GMT

When a customer buys a large extruder machine, the real work is not just loading it on a truck; it’s getting it inside the facility and setting it exactly where it needs to run.

In this video, we are moving a 3.5” Davis Standard extruder and positioning it using remote control skates. This allows us to position the extruder exactly where we want it, inch by inch. Utilizing this technology at our disposal eliminates the space constraints you often find when positioning with a forklift and provides a smoother experience.

Why Remote Control Skates Are Such A Game Changer For Indoor Moves

• Fine control at low speed, forward, reverse, and steering so that the machine can be lined up accurately
• Safer spacing, the operator can stand back with a clear view instead of being tight to pinch points
• Better navigation indoors, proper for narrow aisles, doorways, and turns near other equipment
• Reduced risk to floors and equipment when compared to dragging or forcing a load

What We Look For Before The Move

Every facility is different, so we plan around the constraints before the machine ever comes off the truck.

• We check door width and height clearance, aisle clearance, and turning radius
• Condition of the load path, including transitions, joints, and slopes
• Requirements of the final position, centerline, downstream tie-in, and service clearance
• Orientation of power and control cabinets for easy startup and maintenance

Arlington Is Proud To Announce A New Hire - Kiwi The Dog

Wed, 14 Jan 2026 18:08:41 GMT

Kiwi is the newest member of the Arlington Team. As an office dog, her primary responsibility is greeting customers and she is killing it. Come by Arlington today, see some equipment and pet this wonderful puppy. Arlington has it all, quality used machinery and a puppy.