(3) 2.5" Davis Standard Extruders
We just took in (3) 2.5" Davis Standard Extruders Model 25IN25, 24:1 L/D ratio, Air Cooled, 40 HP Check out all of our Davis Standard Equipment.
Continue readingWhat Are the Guidelines to an AMEA Appraisal?
Standards and Procedures of Professional Appraisal Practice as taken from the AMEA website. The Association of Machinery and Equipment Appraisers (AMEA) recognizes the importance of the Uniform Standards of Professional Appraisal Practice (USPAP). All members are required to become familiar with...
Continue reading
54" Wide Sterling Sheet Line with 4.5" Single Screw Extruder
Item #: 7480 Manufacturer: Sterling Size: 54 54" Wide Sterling Sheet Line with 4.5" Single Screw Extruder Description: Used 54" Wide Sterling Sheet Line with 4.5" Single Screw Extruder. 4.5" Sterling Extruder, Water Cooled, 39:1 L/D Ratio, Double Vented Barrel, 8 Barrel Zones, 70" Centerlin...
Continue readingLiquidation of Large Post Consumer Plastic Recycling Facility
Large Post Consumer Plastic Recycling Facility Set-Up in 2003 Including (10) Titech Visionsort Lines, (10) 120-HP Granulators, Eddy Current and Magnetic Separators, Conveyors, Air Compressors and Parts Plant Closed THE FORMER PREMISES OF WASTE MANAGEMENT RECYCLE AMERICA 2200 Atlantic Ave., Raleigh...
Continue reading
Twin Screw Extruders Available
78mm Theysohn Parallel Twin Screw Extruder, 2006 Now Available! Item #: 63327 Model: TTS 78R-26 78MM Theysohn Parallel Twin Screw Extruder, Counter Rotating, Approximately 26:1 L/D Ratio, 73KW(98HP) AC Motor, ABB Drive, 45.3 RPM Screw, 28 KW Heating Capacity, 5 Heating Zones, 3 Co...
Continue readingVisit our Shop and Warehouse During Plastec Midwest
Arlington Plastics Machinery's shop and warehouse are located minutes from Schaumburg Convention Center. We are also located in between the Schaumburg Convention Center and O'Hare Airport. Before you make your travel arrangements for Plastec Midwest or any time you are in Chicago, make sure you le...
Continue readingAlan Clarke Named One of Plastics News 2014 Rising Stars
Alan Clarke, Vice President of Arlington Plastics Machinery, was honored as one of Plastics News 2014 Rising Stars. Out of all of the applicants they chose 20 as their noteworthy rising stars. Sustainability, new products, potential draw 'Rising Stars' Spotlight on new talent in the industry
Continue reading24" x 40" Cumberland Granulator Model x1000, 3 Knife, 100 Hp, Hard Faced Chamber
Item #: 63316 Model: X1000 Manufacturer: Cumberland Size: 24 Description: Used 24" x 40" Cumberland Granulator Model X1000 , 3 Knife, 100 Hp, Hard Faced Chamber, Open Rotor, Chevron Style, 2 Bed Knives, 23 5/8" Cutting Circle, Air Veyor Discharge to 10 Hp Sterling Blower (Purchased 13') Com...
Continue reading0% Financing for Used Plastics Equipment
We are pleased to offer 0% financing as an option for the vast amount of machinery we have in our warehouse! The offer is subject to approval by our lease company, Direct Capital, and is subject to their terms. Basically, if you qualifty and pay first and last month's payment upfront they will leas...
Continue readingGo to NPE 2015 for FREE
It's never too early to think about next year's NPE 2015: The International Plastics Showcase March 23-27, 2015 in Orlando. Arlington would love to give our customers free passes to the show. If you follow this Link. NPE 2015 FREE PASS you should be able to fill out your information to receive a...
Continue reading