Quote
Call

Looking for an Extruder? Check out this 4.5" Davis Standard Super Blue Extruder!

Used 4.5" Davis Standard Super Blue Extruder, Model SB450 Air-Cooled Barrel, 5 Zones200 HP Reliance 1760 RPM AC Motor With Yaskawa CIMR-F7U4110 AC Inverter Drive (Keypad May Need To Be Replaced)17.39:1 Gearbox Ratio, Rated To 400 HPControl Panel With Eurotherm 3208 Temperature Controllers 5 Bar...

Continue reading

JUST SHIPPED IN! 3.5" American Kuhne Single Screw Extruder, NEW IN 2016!

VIDEO AVAILABLE - Click here! Used 3.5" American Kuhne Single Screw Extruder, 24:1 L/D, 75 Hp Vector Duty Motor, With (IP56 Protection) Direct Drive Gearbox, 100 RPM (UNEX 5.2), Gearbox Rated For 168 HP With 1.5 S.F, Watercooled Feed Throat, Powerseal Bushing, Dynisco Pressure Transducer,...

Continue reading

4.5" Davis Standard Extruder for Sale! -Nice machine! Won't last long!

Used 4.5" Davis Standard Super Blue Extruder, Model SB450 24:1 L/D Ratio17.39:1 Gearbox Ratio, Gearbox Rated to 400 HPAir Cooled Barrel, 5 Barrel Zones, 6 Die ZonesControl Panel With Eurotherm 3208 Temperature Controllers, Tachometer, Amp Gauge, Gefran 40TB Pressure Readout, Solid State Relays,...

Continue reading

NICE CLEAN MACHINE!!

Used 2.5" Davis Standard Mark 6 Extruder, Model 25MK6, 24:1 L/D, Air Cooled, 4 Barrel Zones, 1 Clamp and 1 Die Zone, Controlled By Eurotherm 2208E temperature Controllers, Individual Amp Gauges for Each Zone and Pressure, Load, RPM, Readouts, 4 - 7000 Watt Heater Bands, 40 HP A/C Motor, Control Tech...

Continue reading

REBUILT 80mm Milacron Conical Twin Screw Extruder, NOW AVAILABLE!

Rebuilt 80mm Milacron Conical Twin Screw Extruder, Model CM111, 2017  4 Barrel Heat Zones, 3 Barrel Cooling Zones 75HP Baldor Inverter Duty AC Motor, 2505 RPM, 75HP Yaskawa AC Drive Mosaic Controller Tungsten Barrel and Screws 185 Hours!!!!   Call our office at&nbs...

Continue reading

NEW TO INVENTORY!! 4.5" Polytruder Extruder, 36:1 L/D, Water Cooled, 250 Hp AC, Highboy

Used 4.5" Polytruder Extruder, Model 4.5-32-250  36:1 L/D Ratio, Water Cooled, 250 HP Marathon Blue Max AC Motor With ABB ACS800 Drive, Belt Driven To A Flender Gearbox, Gearbox Ratio 17.74, Gearbox Capacity 250 Hp, Non Vented Barrel, 8 Barrel Zones, 8 Die Zones, RKC Temp Controllers, Model CB4...

Continue reading

Need a machine to go to a facility overseas? No problem!

Last Friday we loaded a crated Extruder into a container going to China!          Arlington accommodates our customers needs and will assist you in getting a machine anywhere in the world!   From the purchase, customs paperwork, crating, to loading safely into a co...

Continue reading

NOW AVAILABLE! Used 1.25" Davis Standard Pedestal Extruder, Model DS125

Used 1.25" Davis Standard Pedestal Extruder, Model DS125, 5 HP AC Black Max Motor, Fuji AF-300G11 AC Drive, 16.5:1 Gear Box Ratio, Air Cooled, 3 Barrel Zones, Eurotherm 2208 Temperature Controls, Has 3 Barrel Zones But No Control, Solid State Relays, Amp Load Gauge, RPM Gauge, Dynisco Pressure Reado...

Continue reading

AVAILABLE NOW! 6" Davis Standard Single Screw Pelletizing Line with Gala Underwater Pelletizer

Used 6" Davis Standard Single Screw Pelletizing Line with Gala Underwater Pelletizer, New in 1999 Line Consist Of The Following Pieces: 6" Davis Standard Single Screw Extruder, Model 60IN60TPIH, Water Cooled, 34:1 L/D, Vented Barrel (Located 126" From Feed Throat),  500HP GE Motors DC Motor, 17...

Continue reading

6" Merritt Extruder available!

6" Merritt Single Screw Extruder, 301 L/D, Water Cooled,500 Hp 6" Merritt Single Screw Extruder, 301 L/D, Water Cooled, Unused 500 Hp AC Motor Priced With NEW Weg AC Drive. 6 Barrel Zones, 3 Die Zones, 182" Barrel Length, Bolt On Style Flange, Amp Readouts Per Zone, Eurotherm Temperature Controls, S...

Continue reading

Arlington Machinery Reviews

We were looking to replace a piece of equipment and Arlington had exactly what we were looking for. So far both pieces we have bought from them have worked out to be good investments.

Subscribe
Return to top