Auction Ends Dec 8th - NEW Battenfeld Twin Screw Extruders and More
Extruders – All New Never Used in Production 114 mm Battenfeld-Cincinnati TwinEX 114-34R Extruder(2) 72 mm Battenfeld-Cincinnati TwinEX 72P-26 Extruders 78 mm Battenfeld-Cincinnati TwinEX 78-28 Extruders(2) 60 mm Battenfeld-Cincinnati Alpha 60 Co-Extruders 63 mm Battenfeld-Cincinnati Coex 63 Ex...
Continue reading
2.5" Davis Standard Extruder now available!
2.5" Davis Standard Extruder 30:1 L/D Ratio17.26:1 Gearbox Ratio, Gearbox Rated To 75 HP, 100 RPM Screw Speed78" Centerline(42" Centerline Without Base)5" L x 4" W Rectangular Feed ThroatAir-Cooled BarrelWater-Cooled Screw40 HP Marathon Blue Max AC Motor & Allen Bradley Powerflex 700 AC Inverter...
Continue reading
A Little Bit About Extruders from Arlington Plastics
Extruders are commonly found in the following industrial processes: Plastics recycling & compounding Blown film production Pipe & profile production Sheet production Oriented film & tape production Extrusion Process The extruder is generally the first stage of a line which pr...
Continue reading
Used Davis Standard Monfilament / Tubing Line - NEW IN 2021
We have this late model extrusion line for sale. It was previously running PLA monofilament for 3D printing but could be converted to run tubing. This line was over $415,000 new, you can buy it from us for about a third of that. This is our stock number 22640A, call me a...
Continue reading
Nice Clean Machine! 4.5" PTI Water Ring Pelletizing Line, Vented Barrel
Used 4.5" PTI Water Ring Pelletizing Line Consisting Of The Following Pieces: 4.5" PTI Trident Extruder, Model 4500, 32:1 L/D Ratio13.976:1 Flender SZNE 305 Gearbox, Rated To 502 HP 250 HP Baldor DC Motor With Reliance Flexpak 3000 DC DriveVented Barrel, Vent Located Approximately 94" From Cent...
Continue reading
Nice Machine Available! 6" Davis Standard Compounding Line With Nordson WRP-35S Pelletizer
Used 6" Davis Standard Compounding Line With Nordson WRP-35S Pelletizer, New In 2009 34:1 L/D Ratio, 17:1 Davis Standard 60IN60T Gearbox Rated To 530 HPOversized Tangential Feed Throat, Grooved Feed Throat LinerWater-Cooled Barrel, 7 Zones500 HP Reliance AC Motor With Yaskawa F7 AC Inverter DriveVen...
Continue reading
MUST SEE! 16mm Twin Screw LabTech Lab Compounding Strand Pelletizing Line, New in 2022!
16mm Twin Screw LabTech Lab Compounding Strand Pelletizing Line, New in 202216mm Co-Rotating Twin Screw Extruder, Model LTE16-40/03, 40:1 L/D, 2.2 KW AC Motor40:1 L/D Dual Vented M390 High Corrosion Resistant Barrel, Vacuum Pump with Vent HousingClosed Loop Water System, Twin Screw Side Feeder Model...
Continue reading
NOW AVAILABLE! 3-Layer LabTech Film Line, Model LUMCR-50-COEX/3L, New in 2022!!
Used 3-Layer Lab Tech Film Line, Model LUMCR-50-COEX/3L, New in 2022!(3) Labtech 16mm Single Screw Extruders, 30:1 L/D, Model LFB/3L-3EXT75mm Wide Flat Sheet/Cast Film 3 Layer Die 4" Wide Three Roll Vertical Sheet Stack, 1.5" Diameter Rolls Top Roll Manually Adjustable, 12" Cool...
Continue reading