REBUILT 80mm Milacron Conical Twin Screw Extruder, NOW AVAILABLE!
Rebuilt 80mm Milacron Conical Twin Screw Extruder, Model CM111, 2017 4 Barrel Heat Zones, 3 Barrel Cooling Zones 75HP Baldor Inverter Duty AC Motor, 2505 RPM, 75HP Yaskawa AC Drive Mosaic Controller Tungsten Barrel and Screws 185 Hours!!!! Call our office at&nbs...
Continue reading
Need a machine to go to a facility overseas? No problem!
Last Friday we loaded a crated Extruder into a container going to China! Arlington accommodates our customers needs and will assist you in getting a machine anywhere in the world! From the purchase, customs paperwork, crating, to loading safely into a co...
Continue reading
2 Extrusions Lines For Sale! TAKE A LOOK!
3.5" Single Screw Flexible PVC Compounding Line Used 3.5" Sterling Single Screw Compounding Line: Includes the Following-3.5" Sterling Single Screw Extruder, 30:1 L/D, Vented, Water Cooled, 100HP Baldor Motor with Drive, Includes Hopper,Screw & DieExtruder Serial Number: 35732-Water Trough with...
Continue reading
NOW AVAILABLE! Used 1.25" Davis Standard Pedestal Extruder, Model DS125
Used 1.25" Davis Standard Pedestal Extruder, Model DS125, 5 HP AC Black Max Motor, Fuji AF-300G11 AC Drive, 16.5:1 Gear Box Ratio, Air Cooled, 3 Barrel Zones, Eurotherm 2208 Temperature Controls, Has 3 Barrel Zones But No Control, Solid State Relays, Amp Load Gauge, RPM Gauge, Dynisco Pressure Reado...
Continue reading
AVAILABLE NOW! 6" Davis Standard Single Screw Pelletizing Line with Gala Underwater Pelletizer
Used 6" Davis Standard Single Screw Pelletizing Line with Gala Underwater Pelletizer, New in 1999 Line Consist Of The Following Pieces: 6" Davis Standard Single Screw Extruder, Model 60IN60TPIH, Water Cooled, 34:1 L/D, Vented Barrel (Located 126" From Feed Throat), 500HP GE Motors DC Motor, 17...
Continue reading
6" Merritt Extruder available!
6" Merritt Single Screw Extruder, 301 L/D, Water Cooled,500 Hp 6" Merritt Single Screw Extruder, 301 L/D, Water Cooled, Unused 500 Hp AC Motor Priced With NEW Weg AC Drive. 6 Barrel Zones, 3 Die Zones, 182" Barrel Length, Bolt On Style Flange, Amp Readouts Per Zone, Eurotherm Temperature Controls, S...
Continue reading
NOW AVAILABLE! 18mm Leistritz Micro Model 18GL35D Twin Screw Extruder
18mm Leistritz Micro Model 18GL35D Twin Screw Extruder, 2.4 Kw (3.2Hp ) 7 Barrel Sections, Water Cooled, 9 Eurotherm Temperature Controllers, Solid State Relays, Dynisco Pressure Transducer With Readout, RPM Gauge, Melt Temp,529 Screw Output RPM, Comes With 1.75" Diameter Paddle Style Material Fee...
Continue reading
3/4" Killion Extruder available!
3/4" Killion Extruder, 24:1 L/D, Three Barrel Zones, 1 Die Zone, Rebuilt Gearbox, NEW Temperature Controllers, NEW 2 HP AC Motor And Drive, 44.5" Centerline (Adjustable), Model KLB .075, Does Not Have Screw, S/N 5348F, 240/1/60 Machine Has Been Tested! Approximate Dimensions and Weight: 45" L x 25"...
Continue reading
EXTREMELY Low Hours- 706!!! Used 93mm Battenfeld-Cincinnati TwinEx Twin Screw Extruder
Used 93mm Battenfeld-Cincinnati TwinEx Twin Screw Extruder, 2014, Extremely Low Hours- 706!!! Parallel Twin Screw Design, 28 L/D, Vented Barrel, 4.5kw Vac Pump, Air Cooled Barrel 4 Cooling Zones,10 Total Temp Zones, 89 KW AC Motor With Direct Drive, Vacon AC Drive, Eisenbeiss Gearbox, 40 RPM Scre...
Continue reading
LOOK! New to Inventory! 1.5" Davis Standard Pedestal Extruder
1.5" Davis Standard Pedestal Extruder,24:1 L/D Ratio, 15:1 Gearbox Ratio, 100 RPM Screw Speed, 10 HP Gearbox Capacity, 7.5 HP Reliance DC RPM III Motor, Reliance FlexPak 3000 Drive, Air-Cooled Barrel, 4 Barrel Zones, 2 Die Zones. Temperature Control Panel With NEW Eurotherm 3205 Temperature Controll...
Continue reading