AVAILABLE NOW! 6" Davis Standard Single Screw Pelletizing Line with Gala Underwater Pelletizer
Used 6" Davis Standard Single Screw Pelletizing Line with Gala Underwater Pelletizer, New in 1999 Line Consist Of The Following Pieces: 6" Davis Standard Single Screw Extruder, Model 60IN60TPIH, Water Cooled, 34:1 L/D, Vented Barrel (Located 126" From Feed Throat), 500HP GE Motors DC Motor, 17...
Continue reading
LOOK! New to Inventory! 1.5" Davis Standard Pedestal Extruder
1.5" Davis Standard Pedestal Extruder,24:1 L/D Ratio, 15:1 Gearbox Ratio, 100 RPM Screw Speed, 10 HP Gearbox Capacity, 7.5 HP Reliance DC RPM III Motor, Reliance FlexPak 3000 Drive, Air-Cooled Barrel, 4 Barrel Zones, 2 Die Zones. Temperature Control Panel With NEW Eurotherm 3205 Temperature Controll...
Continue reading
Recycling Plant Closure, All Equipment SOLD!
Recycling Plant Closure, All Equipment SOLD! 13670B - 6" Davis Standard Extruder, 38:1 LD 600 Hp Pelletizing Line 13634B - Cal Sierra Dual Densification System 13737B - 52" Vecoplan RG52 Single Shaft Shredder 13738B - 52" Vecoplan RG52 Single Shaft Shredder 13727B - Unused Herbold Model MTM508...
Continue reading
New to inventory!! 3.5" Davis Standard Extruder, Model DS3.5, 24:1, 60 Hp
Used 3.5" Davis Standard Extruder, Model DS3.5, 24:1, 60 Hp Air Cooled, 4 Barrel Zones, 3 Die Zones, Eurotherm Controls, Dynisco Pressure Readout, Spectrum Drive, Belt Driven To Gearbox 17.03:1 Ratio, 60 Hp Capacity With 1.25 S.F. 42" Centerline Height With Barrel ClampS/N L8713, Machine New in 1...
Continue reading
3" Davis Standard Extruder, Model MVIN25H-Available Now!
Cleaned, Painted, Tested and New Drive - Ready to find a new home! 3" Davis Standard Extruder, Model MV30IN25H, 24:1 L/D,17.26:1 Gear Box Ratio, 42" Centerline, SO Number 58576, S/N U8886, Gearbox Rated to 112 HP,100 RPM Screw Speed, Clamp, 40 HP AC Motor and NEW Control Techniques Drive, Solid S...
Continue reading
New to inventory!! 1.5" Davis Standard Pedestal Extruder, Model HPE-150A
1.5" Davis Standard Pedestal Extruder, Model HPE-150A, 24:1 L/D,Air Cooled,15 Hp AC Motor, Marathon Black Max, 1760 RPM With Yaskawa F7 AC Drive, 4 Barrel Zones, 5 Die Zones, Dynisco Pressure Transducer, Amp Meter, Rpm Gauge, With Clamp, Hopper and Screw, On Casters Machine Currently Set Up For 23...
Continue reading
Click here! She's got perfect measurements!
BARREL AND SCREW THAT IS !!! If the extruder is in inventory, Arlington Machinery can measure barrels and screws before you buy. We take the next step with used machinery so you know what your getting! 3" Davis Standard Mark 4 Extruder
Continue reading
2.5" Davis Standard Extruder now available!
2.5" Davis Standard Extruder 30:1 L/D Ratio17.26:1 Gearbox Ratio, Gearbox Rated To 75 HP, 100 RPM Screw Speed78" Centerline(42" Centerline Without Base)5" L x 4" W Rectangular Feed ThroatAir-Cooled BarrelWater-Cooled Screw40 HP Marathon Blue Max AC Motor & Allen Bradley Powerflex 700 AC Inverter...
Continue reading