REBUILT 80mm Milacron Conical Twin Screw Extruder, NOW AVAILABLE!
Rebuilt 80mm Milacron Conical Twin Screw Extruder, Model CM111, 2017 4 Barrel Heat Zones, 3 Barrel Cooling Zones 75HP Baldor Inverter Duty AC Motor, 2505 RPM, 75HP Yaskawa AC Drive Mosaic Controller Tungsten Barrel and Screws 185 Hours!!!! Call our office at&nbs...
Continue readingNEW TO INVENTORY!! 4.5" Polytruder Extruder, 36:1 L/D, Water Cooled, 250 Hp AC, Highboy
Used 4.5" Polytruder Extruder, Model 4.5-32-250 36:1 L/D Ratio, Water Cooled, 250 HP Marathon Blue Max AC Motor With ABB ACS800 Drive, Belt Driven To A Flender Gearbox, Gearbox Ratio 17.74, Gearbox Capacity 250 Hp, Non Vented Barrel, 8 Barrel Zones, 8 Die Zones, RKC Temp Controllers, Model CB4...
Continue readingFour 3.5" Polytruder Extruders for Sale
We have a great offering of 3.5" Polytruder Extruders for Sale at this time. They are all Air Cooled, with 75 Hp motors. We have 24:1 LD and 32:1 LD machines available. Just in and won't last long. For more information:Polytruder Extruders
Continue readingNOW AVAILABLE! Used 1.25" Davis Standard Pedestal Extruder, Model DS125
Used 1.25" Davis Standard Pedestal Extruder, Model DS125, 5 HP AC Black Max Motor, Fuji AF-300G11 AC Drive, 16.5:1 Gear Box Ratio, Air Cooled, 3 Barrel Zones, Eurotherm 2208 Temperature Controls, Has 3 Barrel Zones But No Control, Solid State Relays, Amp Load Gauge, RPM Gauge, Dynisco Pressure Reado...
Continue reading6" Merritt Extruder available!
6" Merritt Single Screw Extruder, 301 L/D, Water Cooled,500 Hp 6" Merritt Single Screw Extruder, 301 L/D, Water Cooled, Unused 500 Hp AC Motor Priced With NEW Weg AC Drive. 6 Barrel Zones, 3 Die Zones, 182" Barrel Length, Bolt On Style Flange, Amp Readouts Per Zone, Eurotherm Temperature Controls, S...
Continue reading3/4" Killion Extruder available!
3/4" Killion Extruder, 24:1 L/D, Three Barrel Zones, 1 Die Zone, Rebuilt Gearbox, NEW Temperature Controllers, NEW 2 HP AC Motor And Drive, 44.5" Centerline (Adjustable), Model KLB .075, Does Not Have Screw, S/N 5348F, 240/1/60 Machine Has Been Tested! Approximate Dimensions and Weight: 45" L x 25"...
Continue readingEXTREMELY Low Hours- 706!!! Used 93mm Battenfeld-Cincinnati TwinEx Twin Screw Extruder
Used 93mm Battenfeld-Cincinnati TwinEx Twin Screw Extruder, 2014, Extremely Low Hours- 706!!! Parallel Twin Screw Design, 28 L/D, Vented Barrel, 4.5kw Vac Pump, Air Cooled Barrel 4 Cooling Zones,10 Total Temp Zones, 89 KW AC Motor With Direct Drive, Vacon AC Drive, Eisenbeiss Gearbox, 40 RPM Scre...
Continue readingNew to Inventory! 133MM Werner & Pfleiderer Model ZSK133 Co-Rotating Twin Screw Extruder
Used Werner & Pfleiderer Model ZSK133 co-rotating Twin Screw Extruder. Extruder is 35:1 L/D, with vented electrically heated water cooled barrel. Extruder is equipped with Flender gearbox with 1.837:1 gear ratio supplying 15,100 newton meters per shaft. Includes 9 spare new barrel sections, (2)...
Continue readingLOOK! New to Inventory! 1.5" Davis Standard Pedestal Extruder
1.5" Davis Standard Pedestal Extruder,24:1 L/D Ratio, 15:1 Gearbox Ratio, 100 RPM Screw Speed, 10 HP Gearbox Capacity, 7.5 HP Reliance DC RPM III Motor, Reliance FlexPak 3000 Drive, Air-Cooled Barrel, 4 Barrel Zones, 2 Die Zones. Temperature Control Panel With NEW Eurotherm 3205 Temperature Controll...
Continue readingNow available! 5 Layer Wayne Blown Film Lab Line
5 Layer Wayne Blown Film Lab Line , 4 Extruders 3 Extruders On Common Base, Each Machine 1" Diameter Barrel, 24:1 L/D Ratio, Air Cooled, 3 Barrel Zones, 5 Die Zones, Each Extruder Has Melt Temp, Amp Meter, and RPM Gauge And Gefran Pressure Readout. 3 HP DC Motors on Each Machine, Pedestal Extrud...
Continue reading