Cleated In-Feed Conveyor For Shredder, Approximately 56" Wide X 25' Long
56" x 62" Virtus Equipment Model G45-150 Single Shaft Shredder, 100hp motor,
HOPPER:Large capacity infeed hopper, carbon steel construction with large opening 55.9"x 61.8"
ROTOR:Composed of an 18" diameter tempered steel body. this steel allows the discs to have a very hard surface which is resistant to wear and therefore requires less maintenance. In case the rotor is jammed while shredding, it will invert the rotational direction and stop, allowing to inspect and identify the cause of the jam before re-starting the machine
BED KNIVES:One (1) complete row of bed knives allowing material to get to final size faster
BLADE HOLDERS:these parts are made with a special high resistance steel. they aremanufactured by precision castings to allow a perfect fitting and added protection of the cutting blades. their design allows to easily position and interchange these parts on the rotor.
BLADES:Made in a special through tempered D2 tool steel with multi-cut profile. these blades can be re-used after the first wear by turning them around before having to replace. these blades are fixed to the blade holders with screws that are perfectly protected from the wear caused by the material being shredded. this fixing system allows for a quick and easy blade replacement.
"Hockey Stick" Style Discharge Conveyor To Convey Material From Shredder To Granulator.
NEW 28" x 40" Virtus Equipment Model E70-100 Granulator, 75 Hp, 5 Knife, Open Rotor
Cutting Chamber: 28" diameter rotor by 40" wide (700 x 1000 mm), welded steel construction, 2 reversible and adjustable bed knives with double cutting edges, angled to give double scissor cut action, mounted in the housing, hinged screen cradle for easy replacement of the screen via a separate flap.
Rotor: 5 blade open rotor, welded steel construction, with 10 rotating knives slanted with a "V" design guiding material to the center of the machine while giving a scissor cutting action and minimizing cutting chamber side wear, SKF bearings, and pre-adjustable rotor knives for minimum down-time during knives change (jig for adjustment included).
Knife setting jig: Fixture for quick adjustment of the knives outside the machine. Minimizes downtime and makes knives change easier.
Frame: Welded construction (stationary), complete frame placed on anti-vibrating rubber-metal pads.
Hopper: Special design hopper for hand or conveyor belt feeding with curtains to prevent fly-back. Feed opening 29" high x 40" wide (720 x 1000 mm).Hopper can be lifted together with gas springs for easy no-tools access, allowing complete access to rotor for maintenance and cleaning.
Discharge: Manual or vacuum discharge bin
Motor: 75HP (55 kW) rotary current motor. Voltage 230V or 460V, 60Hz, 3-phase
Controls: 230V or 460V, 60Hz, 3-phase control pkg.