Quote
Call

NEW TO INVENTORY! Gala Underwater Pelletizer, Model 2016- ECBF

Used Gala Underwater Pelletizer, Model 2016- ECBF, Serial Number 11500651-03 Includes MAP 6 Cutting Head, Manually Adjustable , Tempered Water System With Tube and Shell Heat Exchanger, Emersion Water Heater, 5 Hp Spin Dryer Model 2016ECBF, Siemens PLC Control With Control Panel460 volt, 3 Ph, 60 Hz...

Continue reading

Take a Look at our July Pelletizing Specials!

                            NOW AVAILABLE!                                16939A - Gala 6 Underwater Pelletizing System      17981...

Continue reading

NOW AVAILABLE!! Gala 6 Underwater Pelletizing System

Used Gala Pelletizing System  Gala SLC-6 Cutting Head, Spring Loading Cutting Head, 4 KW(5 HP) AC Inverter Duty Motor, 4 Knife Blade Holder.  Gala Model 2008BF Spin Dryer With 5 HP AC Motor, 1/2 HP Make Up Air Blower.  CIS-80 Tempered Water System With Fine Separation Sieve, 5 HP Wate...

Continue reading

Online Only Auction of Large Capacity Polypropylene Recycling Facility

Online Only Auction of Large Capacity Polypropylene Recycling Facility Including Two Erema Extrusion Lines, Gala Wash Line, Material Handing Equipment and Related Equipment. Online Only Auction Bidding Ends 8/2/2018 - 11:00 AM  Location: Ravago Americas, LLC 18314 Mathis Road Waller, TX 77484&n...

Continue reading

4.5" HPM/Gala Reclaim Line availabe. Click for more info!

4.5" HPM/Gala Reclaim Line Consists Of The Following Pieces: 4.5" HPM Single Screw Extruder, 30:1 L/D Ratio, 122 RPM Screw Speed, 14.33:1 Koellmann Gearbox Rated to 350 HP, 250 HP Motor, Parker 690+ AC Inverter Drive In Air-Conditioned Cabinet, Water Cooled Barrel, Approximately 9" x 12" Tangential...

Continue reading

AVAILABLE NOW! 6" Davis Standard Single Screw Pelletizing Line with Gala Underwater Pelletizer

Used 6" Davis Standard Single Screw Pelletizing Line with Gala Underwater Pelletizer, New in 1999 Line Consist Of The Following Pieces: 6" Davis Standard Single Screw Extruder, Model 60IN60TPIH, Water Cooled, 34:1 L/D, Vented Barrel (Located 126" From Feed Throat),  500HP GE Motors DC Motor, 17...

Continue reading

Used 40mm Berstorff/Gala Twin Screw Pelletizing Line available!

Used 40mm Berstorff/Gala Twin Screw Pelletizing Line 43.7mm Barrel Bore Diameter, 37mm Center Distance, 51:1 L/D Ratio,Water Cooled, 8 Barrel Segments, With Vent, Side Port With Screw Feeder, ,110 KW Siemens AC Motor and Drive, Direct Drive To Flender Gear Box, 1,200 Max RPM.530 NM Max Torque Pe...

Continue reading

MUST MOVE!! Make us an OFFER! 160mm Erema Recycling System

160mm Erema Recycling System, Model TVE 160 With Gala Pelletizer 160mm(6.3") Erema Recycling System, Model RGA 160 TVE, S/N: P02/193 Line Consists of the following pieces: Erema RGA160TVE, 230KW(309 HP) Densifier, 72" Diameter Tub, Approximately 30:1 L/D Ratio, Extruder has 370 KW(497 HP) WEG AC M...

Continue reading

Now Available! 160mm Erema Recycling System, Model TVE 160 With Gala Pelletizer

160mm(6.3") Erema Recycling System, Model RGA 160 TVE, S/N: P02/193 Line Consists of the following pieces: Erema RGA160TVE, 230KW(309 HP) Densifier, 72" Diameter Tub, Approximately 30:1 L/D Ratio, Extruder has 370 KW(497 HP) WEG AC Main Motor With Inverter Drive, 16:1 L/D Ratio, Vented Barrel, Ge...

Continue reading

Recently added to Inventory!! - 2.5" Cincinnati Milacron / Gala Micropellet Line

2.5" Cincinnati Milacron / Gala Micropellet Line Consisting of The Following Pieces 2.5" Cincinnati Milacron Single Screw Extruder, 28:1 L/D Ratio, 75 HP Reliance AC Motor With Reliance GV3000/SE Inverter Drive, 14.52:1 Gearbox Ratio, Air-Cooled Barrel, 4 Barrel Zones, 3 Die Zones, Barrier Scr...

Continue reading

Arlington Machinery Reviews

We were looking to replace a piece of equipment and Arlington had exactly what we were looking for. So far both pieces we have bought from them have worked out to be good investments.

Subscribe
Return to top