NOW AVAILABLE! Used 1.25" Davis Standard Pedestal Extruder, Model DS125
Used 1.25" Davis Standard Pedestal Extruder, Model DS125, 5 HP AC Black Max Motor, Fuji AF-300G11 AC Drive, 16.5:1 Gear Box Ratio, Air Cooled, 3 Barrel Zones, Eurotherm 2208 Temperature Controls, Has 3 Barrel Zones But No Control, Solid State Relays, Amp Load Gauge, RPM Gauge, Dynisco Pressure Reado...
Continue reading6" Merritt Extruder available!
6" Merritt Single Screw Extruder, 301 L/D, Water Cooled,500 Hp 6" Merritt Single Screw Extruder, 301 L/D, Water Cooled, Unused 500 Hp AC Motor Priced With NEW Weg AC Drive. 6 Barrel Zones, 3 Die Zones, 182" Barrel Length, Bolt On Style Flange, Amp Readouts Per Zone, Eurotherm Temperature Controls, S...
Continue reading3/4" Killion Extruder available!
3/4" Killion Extruder, 24:1 L/D, Three Barrel Zones, 1 Die Zone, Rebuilt Gearbox, NEW Temperature Controllers, NEW 2 HP AC Motor And Drive, 44.5" Centerline (Adjustable), Model KLB .075, Does Not Have Screw, S/N 5348F, 240/1/60 Machine Has Been Tested! Approximate Dimensions and Weight: 45" L x 25"...
Continue readingEXTREMELY Low Hours- 706!!! Used 93mm Battenfeld-Cincinnati TwinEx Twin Screw Extruder
Used 93mm Battenfeld-Cincinnati TwinEx Twin Screw Extruder, 2014, Extremely Low Hours- 706!!! Parallel Twin Screw Design, 28 L/D, Vented Barrel, 4.5kw Vac Pump, Air Cooled Barrel 4 Cooling Zones,10 Total Temp Zones, 89 KW AC Motor With Direct Drive, Vacon AC Drive, Eisenbeiss Gearbox, 40 RPM Scre...
Continue readingNew to Inventory! 133MM Werner & Pfleiderer Model ZSK133 Co-Rotating Twin Screw Extruder
Used Werner & Pfleiderer Model ZSK133 co-rotating Twin Screw Extruder. Extruder is 35:1 L/D, with vented electrically heated water cooled barrel. Extruder is equipped with Flender gearbox with 1.837:1 gear ratio supplying 15,100 newton meters per shaft. Includes 9 spare new barrel sections, (2)...
Continue readingLOOK! New to Inventory! 1.5" Davis Standard Pedestal Extruder
1.5" Davis Standard Pedestal Extruder,24:1 L/D Ratio, 15:1 Gearbox Ratio, 100 RPM Screw Speed, 10 HP Gearbox Capacity, 7.5 HP Reliance DC RPM III Motor, Reliance FlexPak 3000 Drive, Air-Cooled Barrel, 4 Barrel Zones, 2 Die Zones. Temperature Control Panel With NEW Eurotherm 3205 Temperature Controll...
Continue readingNow available! 5 Layer Wayne Blown Film Lab Line
5 Layer Wayne Blown Film Lab Line , 4 Extruders 3 Extruders On Common Base, Each Machine 1" Diameter Barrel, 24:1 L/D Ratio, Air Cooled, 3 Barrel Zones, 5 Die Zones, Each Extruder Has Melt Temp, Amp Meter, and RPM Gauge And Gefran Pressure Readout. 3 HP DC Motors on Each Machine, Pedestal Extrud...
Continue readingNew to inventory!! 3.5" Davis Standard Extruder, Model DS3.5, 24:1, 60 Hp
Used 3.5" Davis Standard Extruder, Model DS3.5, 24:1, 60 Hp Air Cooled, 4 Barrel Zones, 3 Die Zones, Eurotherm Controls, Dynisco Pressure Readout, Spectrum Drive, Belt Driven To Gearbox 17.03:1 Ratio, 60 Hp Capacity With 1.25 S.F. 42" Centerline Height With Barrel ClampS/N L8713, Machine New in 1...
Continue reading3" Davis Standard Extruder, Model MVIN25H-Available Now!
Cleaned, Painted, Tested and New Drive - Ready to find a new home! 3" Davis Standard Extruder, Model MV30IN25H, 24:1 L/D,17.26:1 Gear Box Ratio, 42" Centerline, SO Number 58576, S/N U8886, Gearbox Rated to 112 HP,100 RPM Screw Speed, Clamp, 40 HP AC Motor and NEW Control Techniques Drive, Solid S...
Continue readingNew to inventory!! 1.5" Davis Standard Pedestal Extruder, Model HPE-150A
1.5" Davis Standard Pedestal Extruder, Model HPE-150A, 24:1 L/D,Air Cooled,15 Hp AC Motor, Marathon Black Max, 1760 RPM With Yaskawa F7 AC Drive, 4 Barrel Zones, 5 Die Zones, Dynisco Pressure Transducer, Amp Meter, Rpm Gauge, With Clamp, Hopper and Screw, On Casters Machine Currently Set Up For 23...
Continue reading