Quote
Call (877) 887-9408 International: (312) 878-3809

300 Ton Cincinnati - Must move next week!!

                                                   ...

Continue reading

Check out our Specials

New with our new website is our Specials Page. The link is located at the top of the page and will take you to some of our highlighted inventory.  Soon you will be able to reach each one through it's category also.  The equipment listed there will be something we just received, at really g...

Continue reading

Recently purchased! 220 Ton Battenfeld Vertical Injection Molding Machine!

        Battenfeld Vertical Injection Molding Machine, Model BA2000V/630H-R, 11.37 oz, With Rotary Table, 2000 Vintage Clamp Force.....................220 TonSize of Mould Platens.......59.84"Open Stroke.....................11.81"Max Distance of Platens.....23.62"E...

Continue reading

Changes at Arlington

You've probably seen our posts about the new website and logo, but I thought I'd add some extra insight into what it all means. We've been working for some time to come up with a simplified logo design that really highlights who we are and what we do - one free from distractions. The new logo really...

Continue reading

52" Retech / Vecoplan Single Shaft Shredder available!

52" Retech / Vecoplan Single Shaft Shredder, Model RG52, 100 Hp Motor, 37 Cutters, 15" Rotor Diameter, Hydraulic Dual Ram, 5 Hp, With Control Panel and PLC, Machine Currently has 3" Screen Along with 2", 3" and 4" Screen Spare Screens. Was Running FilmOn Stand With 124" Infeed Height49" Discharge...

Continue reading

41" Wide Co-Ex Sheet Line now available!! Call for more details!

41" Wide Co-Ex Sheet Line Consisting Of The Following Pieces: Main extruder:2.5" NRM PMIII air cooled Extruder rebuilt in year 200030:1 L/D non vented barrel with Wexco 666 liner17:1 gear box ratio; 40HP D.C. belt drive motor and control4 barrel heating/cooling and 5 Die zones with Syscon Digital du...

Continue reading

What are Pietig's Postings

As the son of a man who worked for the USPS for many years, I thought Pietig's Postings would be an appropriate name for my blog.   Many people aren't sure what a used machinery dealer is or does or how they can help the average enduser, a bank or or liquidator.  I hope to give some insigh...

Continue reading

Used 72 Ton Krauss Maffei Injection Molding Machine available!

Used 72 Ton Krauss Maffei Injection Molding Machine, Model KM 65-160-C2, Manufactured 1998 Clamp Force..................72 TonnagePlaten Size....................24" x 24"Tie Bar Space................15.9" x 15.9"Open Stroke...................19.6"Max Daylight...................29.5"Ejector Stroke......

Continue reading

18" x 31" Rapid Granulator available! Click for more details!

18" x 31" Rapid Granulator, 75 HP Motor, Three Fly Knives, Two Beds Knives, Tangential Feed, Sound Enclosure, Pneumatic Hopper Tilt, Pneumatic Cradle Drop, 56" In-Feed Height Pelican Style Hopper With 72" In-Feed Height Mail Slot In-Feed On Back Of Machine, 1/2 Screen, No Starter. Approximate Di...

Continue reading

Used Lyle Vertical Trim Press, Model 152PV, 2005. Extremely Low Hours !!!

Working Capacity...................35 TonsMax Sheet Width....................55"Stationary Platen Opening.......16.5" x 52"Platen Stroke.........................9"Speed...................................100 CPMOnly 126 Hours !!!!Servo Ejector Servo Nip FeedMoving Platen Driven By Servo Drive With Ge...

Continue reading

Subscribe